H3C S6550X-HI Series Command Reference Manual page 1889

Syntax
ip policy-based-route policy-name
undo ip policy-based-route
Default
No policy is applied to an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
policy-name
specified policy must already exist.
Examples
# Apply policy aaa to VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ip policy-based-route aaa
Related commands
display ip policy-based-route setup
policy-based-route
ip policy-based-route-log enable
Use
ip policy-based-route-log enable
Use
undo ip policy-based-route-log enable
Syntax
ip policy-based-route-log enable
undo ip policy-based-route-log enable
Default
The PBR logging feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The PBR logging feature helps the administrator locate and fix faults. The feature logs PBR events
and sends the logs to the information center. The information center processes the logs according to
output rules. For more information about the information center, see System Management
Configuration Guide.
Excessive PBR log messages degrade the performance of the device. To avoid this problem, disable
the PBR logging feature.
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The
to enable the PBR logging feature.
to disable the PBR logging feature.
13