H3C S6550X-HI Series Command Reference Manual page 2093

Examples
# Clear the statistics for IPv4 prefix list abc.
<Sysname> reset ip prefix-list abc
Related commands
display ip prefix-list
ip prefix-list
IPv6 routing policy commands
apply ipv6 fast-reroute
Use
apply ipv6 fast-reroute
Use
undo apply ipv6 fast-reroute
Syntax
apply
interface-number [ backup-nexthop
ipv6-address }
undo apply ipv6 fast-reroute
Default
No backup link for FRR is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
backup-interface interface-type interface-number
interface by its type and number. If the specified interface is a non-P2P interface, you must also
specify a backup next hop. Non-P2P interfaces include NBMA and broadcast interfaces.
backup-nexthop ipv6-address
Examples
# Configure node 10 of routing policy policy1 to set the backup next hop 1::1/64 for the route
destined for 100::1/64.
<Sysname> system-view
[Sysname] ipv6 prefix-list abc index 10 permit 100::1 64
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ipv6 address prefix-list abc
[Sysname-route-policy-policy1-10] apply ipv6 fast-reroute backup-nexthop 1::1
apply ipv6 next-hop
Use
apply ipv6 next-hop
Use
undo apply ipv6 next-hop
ipv6 fast-reroute
to set a next hop for IPv6 routes.
to set a backup link for fast route (FRR).
to restore the default.
{ backup-interface
ipv6-address ] | backup-nexthop
: Specifies an IPv6 backup next hop.
to restore the default.
41
interface-type
: Specifies a backup output