H3C S6550X-HI Series Command Reference Manual page 2043

Field
apply output-interface
Matches
bytes
Total matches
total bytes
Related commands
reset ipv6 policy-based-route statistics
display ipv6 policy-based-route local
Use display ipv6 policy-based-route local
statistics.
Syntax
display ipv6 policy-based-route local [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number
Examples
# Display IPv6 local PBR configuration and statistics.
<Sysname> display ipv6 policy-based-route local
Policy based routing information for local:
Description
Specifies an output interface for permitted packets. The interface status
includes the following:
•
up—The interface is up.
•
down—The interface is down at network layer.
•
inactive—The interface is not in position.
Number of successful matches on the node.
If the device does not support counting successful matches on a node,
this field displays N/A.
If match counting is disabled on the node, this field is not displayed.
If the device does not have sufficient resources to count matches, this
field displays no statistics resource in brackets.
Number of matching bytes on the node.
This field displays N/A if the device does not support counting matching
bytes on a node.
This field is not displayed if match counting is disabled on the node.
Total number of successful matches on all nodes.
This field displays N/A if the device does not support counting
successful matches on a node.
This field is not displayed if match counting is disabled on all nodes.
Total number of matching bytes on all nodes.
This field displays N/A if the device does not support counting matching
bytes on a node.
This field is not displayed if match counting is disabled on all nodes.
: Specifies the slot number of the device, which is fixed at 1.
to display IPv6 local PBR configuration and
8