H3C S6550X-HI Series Command Reference Manual page 2047

Examples
# Specify PBR policy aaa for IPv6 global PBR.
<Sysname> system-view
[Sysname] ipv6 global policy-based-route aaa
Related commands
display ipv6 policy-based-route global
ipv6 policy-based-route
ipv6 local policy-based-route
Use
ipv6 local policy-based-route
policy.
Use
undo ipv6 local policy-based-route
Syntax
ipv6 local policy-based-route policy-name
undo ipv6 local policy-based-route
Default
No policy is referenced for IPv6 local PBR.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name
specified IPv6 policy must already exist.
Usage guidelines
You can apply only one policy locally. Before you apply a new policy, you must first remove the
current policy.
IPv6 local PBR is used to route locally generated packets except the packets destined for the sender.
This feature might affect local services. Do not configure IPv6 local PBR unless doing so is required.
Examples
# Configure IPv6 local PBR based on policy aaa.
<Sysname> system-view
[Sysname] ipv6 local policy-based-route aaa
Related commands
display ipv6 policy-based-route setup
ipv6 policy-based-route
ipv6 policy-based-route apply
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The
(system view)
to configure IPv6 local PBR based on a specified
to restore the default.
12