H3C S6550X-HI Series Command Reference Manual page 1920

Default
RIPng does not redistribute routes.
Views
RIPng view
Predefined user roles
network-admin
Parameters
protocol
as-number
only to the bgp4+ protocol. If you do not specify the
redistributes all IPv6 EBGP routes. As a best practice, specify the AS number to avoid redistributing
excessive IPv6 EBGP routes.
process-id
argument is available only when the protocol is isisv6, ospfv3, or ripng.
allow-ibgp
argument is set to bgp4+.
allow-direct
routing protocol. By default, the networks of the local interfaces are not redistributed. If you specify
both the
allow-direct
sure the
if-match
keyword. For example, if you specify the
route-type
effect.
cost cost-value
metric is 0.
route-policy route-policy-name
string of 1 to 63 characters.
Usage guidelines
The
import-route bgp4+
bgp4+ allow-ibgp
Examples
# Redistribute routes from IPv6 IS-IS process 7 into RIPng and set the metric for redistributed routes
to 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7
maximum load-balancing
Use
maximum load-balancing
routes for load balancing.
Use
undo maximum load-balancing
Syntax
maximum load-balancing number
undo maximum load-balancing
: Specifies a routing protocol from which RIPng redistributes routes.
: Specifies an AS by its number in the range of 1 to 4294967295. This argument applies
: Specifies a process by its ID in the range of 1 to 65535. The default is 1. This
: Allows redistribution of IBGP routes. This keyword is available when the
: Redistributes the networks of the local interfaces enabled with the specified
keyword and the
rule defined in the routing policy does not conflict with the
rule for the routing policy. Otherwise, the
: Specifies a metric for redistributed routes, in the range of 0 to 16. The default
command redistributes only EBGP routes. The
command redistributes both EBGP and IBGP routes.
route-policy route-policy-name
keyword, do not configure the
allow-direct
allow-direct
: Specifies a routing policy by its name, a case-sensitive
to set the maximum number of equal-cost multi-path (ECMP)
to restore the default.
14
argument, this command
as-number
keyword does not take
protocol
option, make
allow-direct
if-match
import-route