H3C S6550X-HI Series Command Reference Manual page 1874

Views
BGP instance view
Predefined user roles
network-admin
Usage guidelines
For maintenance purposes, you can execute this command to temporarily disconnect BGP sessions
from all peers and peer groups on the device. After maintenance, you can restore the sessions by
simply executing the
This command enables the device to tear down all sessions and clear all routing information.
When you configure the
ignore all-peers
•
Once BGP shutdown is enabled by the
establish BGP sessions with all peers and peer groups.
•
To disable BGP session establishment with a peer or peer group if you have disabled BGP
shutdown, perform one of the following tasks:
Disable BGP session establishment with that peer or peer group by using the

ignore
Disable BGP session establishment with all peers and peer groups by using the

all-peers
Examples
# Shut down BGP sessions to all peers and peer groups for BGP instance 100.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp-default] shutdown process
statistics-interval
Use
statistics-interval
BMP server.
Use
undo statistics-interval
Syntax
statistics-interval value
undo statistics-interval
Default
BGP does not send statistics information to the BMP server.
Views
BMP server view
Predefined user roles
network-admin
Parameters
: Specifies the interval at which BGP sends statistics information to the BMP server, in the
value
range of 1 to 3600 seconds.
form of the command without reconfiguring peer or peer group settings.
undo
shutdown process
command, follow these restrictions and guidelines:
command.
command.
to set the interval at which BGP sends statistics information to the
to restore the default.
command together with the
shutdown process
70
peer ignore
command, the device cannot
peer
ignore
or