H3C S6550X-HI Series Command Reference Manual page 2095

index: 10
Table 8 Command output
Field
Prefix-list6
Permitted
Denied
index
permit
6::/64
ge
le
Related commands
ipv6 prefix-list
reset ipv6 prefix-list
if-match ipv6
Use
if-match ipv6
matches an ACL or IPv6 prefix list.
Use
undo if-match ipv6
Syntax
if-match ipv6 { address | next-hop | route-source } { acl { ipv6-acl-number
| name ipv6-acl-name } | prefix-list prefix-list-name }
undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ]
Default
No ACL or IPv6 prefix list match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Matches the destination address of IPv6 routes.
address
: Matches the next hop of IPv6 routes.
next-hop
route-source
acl ipv6-acl-number
ipv6-acl-number
next-hop
Permit 6::/64
Description
Name of the IPv6 prefix list.
Number of routes matching the criterion.
Number of routes not matching the criterion.
Index number of an item.
Match mode of the item:
•
•
IPv6 address and prefix length for matching.
Greater-equal, the lower prefix length limit.
Less-equal, the upper prefix length limit.
to match IPv6 routes whose destination, next hop, or source address
to remove the specified ACL or IPv6 prefix list match criterion.
: Matches the source address of IPv6 routes.
: Specifies an IPv6 ACL by its number. The value range for the
argument is 2000 to 3999 for the
and
route-source
Permit.
Deny.
address
keywords.
43
ge 66 le 88
keyword, and 2000 to 2999 for the