H3C S6550X-HI Series Command Reference Manual page 2357

Related commands
(IKEv2 profile view)
dpd
ikev2 ipv6-address-group
Use
ikev2 ipv6-address-group
addresses to remote peers.
Use
undo ikev2 ipv6-address-group
Syntax
ikev2 ipv6-address-group group-name prefix prefix/prefix-len assign-len
assign-len
undo ikev2 ipv6-address-group group-name
Default
No IKEv2 IPv6 address pools exist.
Views
System view
Predefined user roles
network-admin
Parameters
group-name
case-insensitive string of 1 to 63 characters.
prefix prefix/prefix-len
. The value range for the
length
assign-len assign-len
assign-len
The difference between
Usage guidelines
Different from the IKEv2 IPv4 address pool, the device assigns an IPv6 subnet to a peer from the
IKEv2 IPv6 address pool. The peer can use the assigned IPv6 subnet to assign IPv6 addresses to
other devices.
IKEv2 IPv6 address pools cannot overlap with each other.
Examples
# Configure an IKEv2 IPv6 address pool with name ipv6group, prefix 1:1::/64, and assigned prefix
length 80.
<Sysname> system-view
[Sysname] ikev2 ipv6-address-group ipv6group prefix 1:1::/64 assign-len 80
Related commands
ipv6-address-group
ikev2 keychain
Use
ikev2 keychain
existing IKEv2 keychain.
: Specifies a name for the IKEv2 IPv6 address pool. The
: Specifies an IPv6 prefix in the format of
prefix-len
: Specifies the assigned prefix length. The value range for the
argument is 0 to 128, and the value must be greater than or equal to
assign-len
to create an IKEv2 keychain and enter its view, or enter the view of an
to configure an IKEv2 IPv6 address pool for assigning IPv6
to delete an IKEv2 IPv6 address pool.
argument is 1 to 128.
and
prefix-len
23
group-name
prefix
prefix-len.
must be no more than 16.
argument is a
/ prefix