H3C S6550X-HI Series Command Reference Manual page 1878

undo apply
ip-address&<1-2> ]
Default
No next hops are set.
Views
Policy node view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist.
ip-address
vpn-instance-name
network.
: Specifies that the next hop must be directly connected to take effect.
direct
track track-entry-number
: Indicates that you can repeat the previous group of parameters to configure up to two next
&<1-2>
hops.
Usage guidelines
You can specify multiple next hops for backup or load sharing in one command line or by executing
this command multiple times.
With a next hop specified, the
Without any next hop specified, the
Examples
# Set a directly-connected next hop of 1.1.1.1.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] apply next-hop 1.1.1.1 direct
Related commands
apply loadshare
ip policy-based-route-log enable
apply output-interface
Use
apply output-interface
Use
undo apply output-interface
Syntax
apply output-interface NULL 0
undo apply output-interface [ NULL 0 ]
Default
No output interfaces are set.
next-hop
: Specifies the IP address of the next hop. If you do not specify the
option or the
: Specifies a track entry by its number in the range of 1 to 1024.
undo apply next-hop
[ [ vpn-instance
: Specifies an MPLS L3VPN instance by its name, a
keyword, the next hop belongs to the public
inbound-vpn
undo apply next-hop
to set output interfaces.
to remove output interfaces.
2
vpn-instance-name
command removes the next hop.
command removes all next hops.
]
vpn-instance