H3C S6550X-HI Series Command Reference Manual page 1948

Field
IPv6 segment routing
Fast-reroute TI-LFA
SR microloop-avoidance
SR microloop-avoidance RIB-update-delay
Area
IPsec profile name
Keychain authentication: Enabled (test)
Created by Vlink
7/5 translator state
7/5 translate stability timer interval
display ospfv3 abr-asbr
Use
display ospfv3 abr-asbr
ASBR.
Syntax
display ospfv3 [ process-id ] abr-asbr
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
specify this argument, the command displays information about all the routes to the OSPFv3 ABR
and ASBR.
Examples
# Display information about all the routes to the OSPFv3 ABR and ASBR.
(MPLS TE xxx)
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
Description
This field is not supported in the current software version.
IPv6 segment routing state: Disabled or Enabled.
This field is not supported in the current software version.
Topology independent LFA (TI-LFA) FRR status: Disabled
or Enabled.
This field is not supported in the current software version.
SR microloop avoidance status: Disabled or Enabled.
This field is not supported in the current software version.
SR microloop avoidance delay timer in milliseconds.
MPLS TE is not supported in the current software version.
Area information. The information in parentheses indicates
whether the area is enabled with MPLS TE.
IPsec profile applied to the area.
Keychain authentication is enabled for the area, and the
keychain test is used.
The area is created through virtual link.
State of the translator that translates Type-7 LSAs to
Type-5 LSAs:
•
Enabled—The translator is specified through
commands.
•
Elected—The translator is designated through
election.
•
Disabled—The device is not a translator.
Stability interval (in seconds) for Type-7 LSA-to-Type-5 LSA
translation.
to display information about the routes to OSPFv3 ABR and
14