H3C S6550X-HI Series Command Reference Manual page 2060

Parameters
: Specifies an IP precedence in the range of 0 to 7.
value
: Clears the IP precedence of matching routes.
clear
Examples
# Configure node 10 in permit mode for routing policy policy1 to set an IP precedence of 3 for BGP
routes matching extended community list 100.
<Sysname> system-view
[Sysname] ip extcommunity-list 100 permit rt 100:100
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match extcommunity 100
[Sysname-route-policy-policy1-10] apply ip-precedence 3
apply isis
Use
apply isis
Use
undo apply isis
Syntax
apply isis { level-1 | level-1-2 | level-2 }
undo apply isis
Default
No IS-IS level is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Redistributes routes into IS-IS Level-1.
level-1
level-1-2
: Redistributes routes into IS-IS Level-2.
level-2
Examples
# Configure node 10 in permit mode for routing policy policy1 to redistribute routes that have a tag
of 8 to IS-IS level-2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
[Sysname-route-policy-policy1-10] apply isis level-2
apply local-preference
Use
apply local-preference
Use
undo apply local-preference
to redistribute routes into the specified IS-IS level.
to restore the default.
: Redistributes routes into both IS-IS Level-1 and Level-2.
to set a local preference for BGP routes.
to restore the default.
8