H3C S6550X-HI Series Command Reference Manual page 2196

Congestion management commands
SP commands
display qos queue sp interface
Use
display qos queue sp interface
Syntax
display qos queue sp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
not specify an interface, this command displays the SP queuing configuration of all interfaces.
Examples
# Display the SP queuing configuration of Twenty-FiveGigE 1/0/1.
<Sysname> display qos queue sp interface twenty-fivegige 1/0/1
Interface: Twenty-FiveGigE1/0/1
Output queue: Strict Priority queuing
Table 15 Command output
Field
Interface
Output queue
qos sp
Use
qos sp
Use
undo qos sp
Syntax
qos sp
undo qos sp
Default
An interface uses packet-count WRR queuing.
Views
Interface view
to enable SP queuing on an interface.
to restore the default.
to display the SP queuing configuration of an interface.
: Specifies an interface by its type and number. If you do
Description
Interface type and interface number.
Type of the current output queue.
42