H3C S6550X-HI Series Command Reference Manual page 1972

Parameters
process-id
specify a process, this command displays neighbor information for all processes.
area area-id
to 4294967295 that is translated into the IPv4 address format. If you do not specify an area, this
command displays neighbor information for all areas.
interface-type interface-number
: Displays detailed neighbor information.
verbose
peer-router-id
statistics
Usage guidelines
If you do not specify an interface and a neighbor, this command displays neighbor information for all
interfaces.
Examples
# Display neighbor information for OSPFv3 process 1.
<Sysname> display ospfv3 1 peer
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID
2.2.2.2
Sham link destination: 3::3
Router ID
100.1.1.1
Table 20 Command output
Field
Router ID
Pri
State
Dead-Time
InstID
Interface
Sham link destination
# Display detailed neighbor information for OSPFv3 process 1.
<Sysname> display ospfv3 1 peer verbose
Area 0.0.0.1 interface Vlan1's neighbors
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0
: Specifies a neighbor.
: Displays OSPFv3 neighbor statistics.
OSPFv3 Process 1 with Router ID 1.1.1.1
Pri State
1 Init/ -
Pri State
1 Full/ -
OSPFv3 Process 1 with Router ID 1.1.1.1
: Specifies an interface by its type and number.
Dead-Time InstID Interface
00:00:36 0 Vlan1
Dead-Time InstID
00:00:39 0
Description
Neighbor router ID.
Neighboring router priority.
Neighbor state.
Dead time remained.
Instance ID.
Interface connected to the neighbor.
IPv6 destination address of the OSPFv3 sham link.
38