H3C S6550X-HI Series Command Reference Manual page 2167

Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
: Specifies green packets.
green
: Specifies red packets.
red
: Specifies yellow packets.
yellow
dot1p-value
customer-dot1p-trust
VLAN tag.
Usage guidelines
The
remark dot1p dot1p-value
commands override each other in the same traffic behavior. The
customer-dot1p-trust
If you execute the
most recent configuration takes effect.
If you do not specify a color, packets of all colors are marked.
Examples
# Configure traffic behavior database to mark matching traffic with 802.1p 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
# Configure an inner-to-outer tag priority copying action in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p customer-dot1p-trust
remark drop-precedence
Use
remark drop-precedence
Use
undo remark drop-precedence
Syntax
remark drop-precedence drop-precedence-value
undo remark drop-precedence
Default
No drop priority marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
: Specifies the 802.1p priority to be marked for packets, in the range of 0 to 7.
: Copies the 802.1p priority value in the inner VLAN tag to the outer
command does not take effect on single-tagged packets.
remark dot1p dot1p-value
to configure a drop priority marking action in a traffic behavior.
and
remark dot1p customer-dot1p-trust
command multiple times for the same color, the
to restore the default.
13
remark dot1p