H3C S6550X-HI Series Command Reference Manual page 1978

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
specify this argument, the command displays the OSPFv3 route information for all processes.
ipv6-address prefix-length
specifies an IPv6 prefix. The
to 128.
Examples
# Display OSPFv3 routing information.
<Sysname> display ospfv3 routing
-------------------------------------------------------------------------
I - Intra area route,
IA - Inter area route,
* - Selected route
*Destination: 1::/64
Type
AdvRouter
NibID
Interface
Nexthop
BkNexthop
Status
*Destination: 23::/64
Type
AdvRouter
NibID
Interface
Nexthop
BkNexthop
Status
*Destination: 8::/64
Type
AdvRouter
NibID
Interface
Nexthop
BkNexthop
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
prefix-length
OSPFv3 Process 1 with Router ID 9.9.9.9
E1 - Type 1 external route,
E2 - Type 2 external route,
: IA
: 2.2.2.2
: 0x23000003
: Vlan10
: FE80::6AC7:45FF:FE5C:206
: N/A
: Rely
: I
: 3.3.3.3
: 0x23000001
: Vlan10
: ::
: N/A
: Direct
: E2
: 1.1.1.1
: 0x23000004
: Vlan10
: FE80::6AC7:45FF:FE5C:206
: N/A
: Specifies an IPv6 address. The
argument specifies a prefix length in the range of 0
Area
Preference : 10
Cost
BkInterface: N/A
Area
Preference : 10
Cost
BkInterface: N/A
Tag
Preference : 150
Cost
BkInterface: N/A
44
ipv6-address
N1 - Type 1 NSSA route
N2 - Type 2 NSSA route
: 0.0.0.1
: 2
: 0.0.0.1
: 1
: 1
: 1
argument