H3C S6550X-HI Series Command Reference Manual page 2038

Default
No output interfaces are set.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
: Specifies interface Null 0.
NULL 0
Usage guidelines
You can specify only interface Null 0 as the output interface.
Examples
# Specify Null 0 as the output interface for IPv6 packets.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] apply output-interface NULL 0
apply statistics
Use
apply statistics
Use undo apply statistics
Syntax
apply statistics
undo apply statistics
Default
Match counting is disabled on an IPv6 policy node.
Views
IPv6 policy node view
Predefined user roles
network-admin
Usage guidelines
To include the number of successful matches and matching bytes on an IPv6 policy node in the
statistics displayed by a
hardware resources, disable this counting function.
This apply clause is always executed for the IPv6 policy node.
Examples
# Enable match counting on IPv6 policy node 1.
<Sysname> system-view
[Sysname] ipv6 policy-based-route 1 permit node 1
[Sysname-pbr6-1-1] apply statistics
to enable match counting on an IPv6 policy node.
to restore the default.
command, execute this command. As a best practice to conserve
display
3