H3C S6550X-HI Series Command Reference Manual page 2019

instance instance-id
default is 0.
Usage guidelines
When an NBMA interface finds its neighbor is down, it sends hello packets at the poll interval.
The poll interval must be a minimum of four times the hello interval.
Examples
# Set the poll interval on VLAN-interface 10 to 120 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 timer poll 120
Related commands
ospfv3 timer hello
ospfv3 timer retransmit
Use
ospfv3 timer retransmit
Use
undo ospfv3 timer retransmit
Syntax
ospfv3 timer retransmit seconds [ instance instance-id ]
undo ospfv3 timer retransmit [ instance instance-id ]
Default
The interval is 5 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
seconds : Specifies the LSA retransmission interval in the range of 1 to 3600 seconds.
instance instance-id
Usage guidelines
After the device sends an LSA to its neighbor, it waits for an acknowledgment. If the device receives
no acknowledgment after the LSA retransmission interval elapses, it will retransmit the LSA.
To avoid unnecessary retransmissions, set an appropriate retransmission interval. For example, you
can set a large retransmission interval value on a low-speed link.
Examples
# Set the LSA retransmission interval to 12 seconds on VLAN-interface10 in instance 1.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 timer retransmit 12 instance 1
: Specifies an interface instance by its ID in the range of 0 to 255. The
to set the LSA retransmission interval for an interface.
to remove the configuration.
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
85