H3C S6550X-HI Series Command Reference Manual page 2049

Parameters
policy-name
: Specifies the match mode for the policy node as deny.
deny
: Specifies the match mode for the policy node as permit (default mode).
permit
node node-number
priority. The value range for the
Usage guidelines
To delete an IPv6 policy that has already applied to an interface, you must delete the policy from the
interface first.
If a policy node is specified, the
specified policy node. If a match mode is specified, the command deletes all nodes configured with
the match mode. If no node is specified, the command deletes the whole policy.
Examples
# Create permit-mode Node 10 for IPv6 policy aaa and enter its view.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aaa permit node 10
[Sysname-pbr6-aaa-10]
Related commands
display ipv6 policy-based-route
ipv6 policy-based-route-log enable
ipv6 policy-based-route-log enable
Use
ipv6 policy-based-route-log enable
Use
undo ipv6 policy-based-route-log enable
Syntax
ipv6 policy-based-route-log enable
undo ipv6 policy-based-route-log enable
Default
The IPv6 PBR logging feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The IPv6 PBR logging feature helps the administrator locate and fix faults. The feature logs IPv6
PBR events and sends the logs to the information center. The information center processes the logs
according to output rules. For more information about the information center, see System
Management Configuration Guide.
Excessive IPv6 PBR log messages degrade the performance of the device. To avoid this problem,
disable the IPv6 PBR logging feature.
: Specifies a policy name, a case-sensitive string of 1 to 19 characters.
: Specifies the number of the IPv6 policy node. A smaller number has a higher
node-number
undo ipv6 policy-based-route
argument varies by device model.
to enable the IPv6 PBR logging feature.
to disable the IPv6 PBR logging feature.
14
command deletes the