H3C S6550X-HI Series Command Reference Manual page 1953

1000:4:11:3::/96
Table 6 Command output
Field
Destination
Protocol
Process
Type
Metric
display ospfv3 event-log
Use
display ospfv3 event-log
Syntax
display ospfv3 [ process-id ] event-log { lsa-flush | peer | spf }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
specify this argument, the command displays OSPFv3 log information for all processes.
lsa-flush
: Specifies neighbor log information.
peer
: Specifies route calculation log information.
spf
Usage guidelines
Route calculation logs show the number of routes newly installed in the IPv6 routing table.
Neighbor logs include information about the following events:
•
The OSPFv3 neighbor state goes down.
•
The OSPFv3 neighbor state goes backward because the local end receives BadLSReq,
SeqNumberMismatch, and 1-Way events.
Examples
# Display OSPFv3 LSA aging log information for OSPFv3 process 1.
<Sysname>display ospfv3 1 event-log lsa-flush
2019-09-02 07:55:25 Received MaxAge LSA from 1.1.1.1
Type: 3
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
: Specifies LSA aging log information.
OSPFv3 Process 1 with Router ID 1.3.3.3
LS ID: 0.0.0.2
Static
Description
Prefix and prefix length of the summarized route.
Routing protocol from which the route was redistributed.
Process of the routing protocol from which the route was
redistributed.
Type of the summarized route.
Metric of the summarized route.
to display OSPFv3 log information.
AdvRtr: 1.1.1.1
19
0 2 1
Seq#: 80000001