H3C S6550X-HI Series Command Reference Manual page 2188

Syntax
qos map-table { dot1p-dp | dot1p-exp | dot1p-lp | dscp-dot1p| dscp-dp |
dscp-dscp | exp-dot1p | exp-dp }
Views
System view
Predefined user roles
network-admin
Parameters
For the description of other keywords, see
Examples
# Enter the 802.1p-local priority map view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
Related commands
display qos map-table
import
Priority trust mode commands
display qos trust interface
Use
display qos trust interface
interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
not specify an interface, this command displays the priority trust mode and port priorities of all
interfaces.
Examples
# Display the priority trust mode and port priority of Twenty-FiveGigE 1/0/1.
<Sysname> display qos trust interface twenty-fivegige 1/0/1
Interface: Twenty-FiveGigE1/0/1
Port priority trust information
Port priority:4
Port dscp priority: -
Table 10.
to display the priority trust mode and port priorities of an
: Specifies an interface by its type and number. If you do
34