H3C S6550X-HI Series Command Reference Manual page 2336

# Enable AAA authorization. Specify ISP domain name abc and username test.
[Sysname-ikev2-profile-profile1] aaa authorization domain abc username test
Related commands
display ikev2 profile
address
Use
address
Use
undo address
Syntax
address { ipv4-address [ mask | mask-length ] | ipv6 ipv6-address
[ prefix-length ] }
undo address
Default
The IKEv2 peer's IP address or IP address range is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
ipv4-address
: Specifies the subnet mask of the IPv4 address.
mask
mask-length
ipv6 ipv6-address
prefix-length
Usage guidelines
Both the initiator and the responder can look up an IKEv2 peer by IP address in IKEv2 negotiation.
The IP addresses of different IKEv2 peers in the same IKEv2 keychain cannot be the same.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify the IKEv2 peer's IP address 3.3.3.3 with subnet mask 255.255.255.0.
[Sysname-ikev2-keychain-key1-peer-peer1] address 3.3.3.3 255.255.255.0
Related commands
ikev2 keychain
peer
to specify the IP address or IP address range of an IKEv2 peer.
to restore the default.
: Specifies the IPv4 address of the IKEv2 peer.
: Specifies the subnet mask length of the IPv4 address, in the range of 0 to 32.
: Specifies the IPv6 address of the IKEv2 peer.
: Specifies the prefix length of the IPv6 address, in the range of 0 to 128.
2