H3C S6550X-HI Series Command Reference Manual page 2344

network-operator
Parameters
: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63 characters.
name
: Specifies the default IKEv2 proposal.
default
Usage guidelines
This command displays IKEv2 proposals in descending order of priorities. If you do not specify any
parameters, this command displays the configuration of all IKEv2 proposals.
Examples
# Display the configuration of all IKEv2 proposals.
<Sysname> display ikev2 proposal
IKEv2 proposal : 1
Encryption: 3DES-CBC AES-CBC-128 AES-CTR-192 CAMELLIA-CBC-128
Integrity: MD5 SHA256
PRF: MD5 SHA256
DH Group: MODP1024/Group2 MODP1536/Group5
IKEv2 proposal : default
Encryption: AES-CBC-128 3DES-CBC
Integrity: SHA1 MD5
PRF: SHA1 MD5
DH Group: MODP1536/Group5 MODP1024/Group2
Table 3 Command output
Field
IKEv2 proposal
Encryption
Integrity
PRF
DH Group
Related commands
ikev2 proposal
display ikev2 sa
Use
display ikev2 sa
Syntax
display ikev2 sa [ count | [ { local | remote } { ipv4-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] ] [ verbose [ tunnel
tunnel-id ] ] ]
Views
Any view
Predefined user roles
network-admin
Description
Name of the IKEv2 proposal.
Encryption algorithms that the IKEv2 proposal uses.
Integrity protection algorithms that the IKEv2 proposal uses.
PRF algorithms that the IKEv2 proposal uses.
DH groups that the IKEv2 proposal uses.
to display the IKEv2 SA information.
10