H3C S6550X-HI Series Command Reference Manual page 2031

Parameters
default-route-advertise-always
into the stub area.
no-summary
stub area. No AS-external-LSA, Inter-Area-Prefix-LSA, or other Inter-Area-Router-LSA is advertised
in the area. The area is a totally stub area.
Usage guidelines
To remove the
overwrite it.
To configure an area as a stub area, execute the
Examples
# Configure OSPFv3 area 1 as a stub area.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] stub
Related commands
default-cost
stub-router
Use
stub-router
Use undo stub-router
Syntax
stub-router r-bit [ include-stub | on-startup { seconds | wait-for-bgp
[ seconds ] } ] *
stub-router max-metric [ external-lsa [ max-metric-value ] | summary-lsa
[ max-metric-value ] | include-stub | on-startup { seconds | wait-for-bgp
[ seconds ] } ] *
undo stub-router
Default
The router is not configured as a stub router.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
: Clears the R-bit of the Option field in Type-1 LSAs.
r-bit
max-metric
external-lsa max-metric-value
16777215. The default is 16711680.
summary-lsa max-metric-value
of 1 to 16777215. The default is 16711680.
: Enables the ABR to advertise only a default route in an Inter-Area-Prefix-LSA into the
configuration on an ABR, execute the
no-summary
to configure a router as a stub router.
to restore the default.
: Advertises the locally generated Type-1 LSAs with the maximum cost of 65535.
: Enables the ABR to always advertise a default route
command on all routers attached to the area.
stub
: Specifies a cost for external LSAs, in the range of 1 to
: Specifies a cost for Type-3 and Type-4 LSAs, in the range
97
command again to
stub