H3C S6550X-HI Series Command Reference Manual page 1990

Examples
# Advertise link state information of OSPFv3 process 1 to BGP.
<Sysname> system-view
[ ]
Sysname
[
Sysname-ospfv3-1
dscp
Use to set the DSCP value for outgoing OSPFv3 packets.
dscp
Use
undo dscp
Syntax
dscp dscp-value
undo dscp
Default
The DSCP value for outgoing OSPFv3 packets is 48.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
dscp-value
Examples
# Set the DSCP value for outgoing OSPFv3 packets to 63 in OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] dscp 63
enable ipsec-profile
Use
enable ipsec-profile
Use
undo enable ipsec-profile
Syntax
enable ipsec-profile profile-name
undo enable ipsec-profile
Default
No IPsec profile is applied to an OSPFv3 area.
Views
OSPFv3 area view
Predefined user roles
network-admin
ospfv3 1
]
distribute bgp-ls
to restore the default.
: Specifies the DSCP value in the range of 0 to 63 for outgoing OSPFv3 packets.
to apply an IPsec profile to an OSPFv3 area.
to remove the IPsec profile from the OSPFv3 area.
56