H3C S6550X-HI Series Command Reference Manual page 2300

Parameters
: Specifies the username for client authentication. The username is a case-sensitive
username
string of 1 to 55 characters and must meet the following requirements:
•
The username cannot contain a forward slash (/), backslash (\), vertical bar (|), colon (:),
asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or an at sign (@).
•
The username cannot be a, al, or all.
: Specifies the password for client authentication.
password
: Specifies a password in encrypted form.
cipher
simple : Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
: Specifies the password string. Its plaintext form is a case-sensitive string of 1 to 63
string
characters. Its encrypted form is a case-sensitive string of 1 to 110 characters.
Usage guidelines
Configure this command in the IKE profile used by a branch gateway. The branch gateway can then
use the username and password to pass AAA authentication and establish an IPsec tunnel with the
IPsec gateway at the enterprise center.
Examples
# Specify username abc and password 123abc for client authentication.
<Sysname> system-view
[Sysname] ike profile test
[Sysname-ike-profile-test] client-authentication xauth user abc password simple 123
description
Use
description
Use
undo description
Syntax
description text
undo description
Default
An IKE proposal does not have a description.
Views
IKE proposal view
Predefined user roles
network-admin
Parameters
: Specifies the description, a case-sensitive string of 1 to 80 characters.
text
Usage guidelines
When multiple IKE proposals exist, you configure different descriptions for them to distinguish them.
Examples
# Configure a description of test for IKE proposal 1.
<Sysname> system-view
to configure a description for an IKE proposal.
to restore the default.
6