H3C S6550X-HI Series Command Reference Manual page 1991

Parameters
profile-name
characters.
Usage guidelines
To protect routing information and prevent attacks, OSPFv3 can authenticate protocol packets by
using an IPsec profile. For more information about IPsec profiles, see IPsec configuration in Security
Configuration Guide.
Examples
# Apply IPsec profile profile001 to Area 0 in OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0] enable ipsec-profile profile001
event-log
Use
event-log
Use
undo event-log
Syntax
event-log { lsa-flush | peer | spf } size count
undo event-log { lsa-flush | peer | spf } size
Default
The number of LSA aging logs, neighbor logs, or route calculation logs is 10.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
lsa-flush
: Specifies the number of neighbor logs.
peer
: Specifies the number of route calculation logs.
spf
size count
Examples
# Set the number of route calculation logs to 50 in OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] event-log spf size 50
fast-reroute
Use
fast-reroute
Use
undo fast-reroute
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
to set the number of OSPFv3 logs.
to remove the configuration.
: Specifies the number of LSA aging logs.
: Specifies the number of OSPFv3 logs, in the range of 0 to 65535.
to configure OSPFv3 FRR.
to restore the default.
57