H3C S6550X-HI Series Command Reference Manual page 2333

invalid-proposal
invalid-protocol
invalid-sign
no-sa-failure
proposal-add
proposal-delete
tunnel-start
tunnel-stop
unsupport-exch-type
Usage guidelines
If you do not specify any keywords, this command enables or disables all SNMP notifications for IKE.
To generate and output SNMP notifications for a specific IKE failure type or event type, perform the
following tasks:
1. Enable SNMP notifications for IKE globally.
2. Enable SNMP notifications for the failure type or event type.
Examples
# Enable SNMP notifications for IKE globally.
<Sysname> system-view
[Sysname] snmp-agent trap enable ike global
# Enable SNMP notifications for events of creating IKE tunnels.
[Sysname] snmp-agent trap enable ike tunnel-start
: Specifies notifications about invalid-IKE-proposal failures.
: Specifies notifications about invalid-protocol failures.
: Specifies notifications about invalid-signature failures.
: Specifies notifications about SA-not-found failures.
: Specifies notifications about events of adding IKE proposals.
: Specifies notifications about events of deleting IKE proposals.
: Specifies notifications about events of creating IKE tunnels.
: Specifies notifications about events of deleting IKE tunnels.
: Specifies notifications about negotiation-type-unsupported failures.
39