H3C S6550X-HI Series Command Reference Manual page 1796

BGP compares the timer values specified for a BGP peer by using the
command and the
effect. If you did not execute the
BGP route
route-update-interval
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the BGP route advertisement delay timer to 60 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp-default] route-update-delay 60
Related commands
peer route-update-interval
send-buffer-size
Use
send-buffer-size
Use
undo send-buffer-size
Syntax
send-buffer-size size
undo send-buffer-size
Default
The send buffer size is 32768 bytes.
Views
BGP instance view
Predefined user roles
network-admin
Parameters
: Specifies the send buffer size in the range of 2048 to 327680 bytes. The default value is
size
32768.
Usage guidelines
A small send buffer size might cause a long convergence time when there are a large number of
update messages to send. Execute this command to set an appropriate send buffer size to improve
the convergence performance.
This command takes effect only on BGP sessions established or re-established after the command
is executed.
Examples
# In BGP instance view, set the send buffer size to 50000 bytes.
<Sysname> system-view
[ ]
Sysname
[Sysname-bgp-default] send-buffer-size 50000
Related commands
peer send-buffer-size
peer route-update-interval
peer route-update-interval
advertisement
command.
to set the send buffer size.
bgp 100
delay timer with
to restore the default.
171
route-update-delay
command. Only the larger timer value takes
command, BGP compares the
the default value of the
peer