H3C S6550X-HI Series Command Reference Manual page 1879

Views
Policy node view
Predefined user roles
network-admin
Parameters
: Specifies interface Null 0 as the output interface.
NULL 0
Usage guidelines
You can specify only interface Null 0 as the output interface.
Examples
# Specify interface Null 0 as the output interface for IP packets.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] apply output-interface
apply statistics
Use
apply statistics
Use
undo apply statistics
Syntax
apply statistics
undo apply statistics
Default
Successful matches counting is disabled on a policy node.
Views
Policy node view
Predefined user roles
network-admin
Usage guidelines
To include the number of successful matches and matching bytes on a policy node in the statistics
displayed by a
hardware resources, disable this counting function.
This apply clause is always executed for the policy node.
Examples
# Enable match counting on policy node 11.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] apply statistics
description
Use
description
Use
undo description
to enable match counting on a policy node.
to restore the default.
command, execute this command. As a best practice to conserve
display
to configure a description for a policy node.
to restore the default.
NULL 0
3