H3C S6550X-HI Series Command Reference Manual page 2156

classifier-name
characters. If you do not specify a traffic class, this command displays all traffic classes.
Examples
# Display all user-defined traffic classes.
<Sysname> display traffic classifier user-defined
User-defined classifier information:
Classifier: 1 (ID 100)
Operator: AND
Rule(s) :
If-match acl 2000
Classifier: 2 (ID 101)
Operator: AND
Rule(s) :
If-match protocol ipv6
Classifier: 3 (ID 102)
Operator: AND
Rule(s) :
-none-
Table 1 Command output
Field
Classifier
Operator
Rule(s)
if-match
Use
if-match
Use
undo if-match
Syntax
if-match match-criteria
undo if-match match-criteria
Default
No match criterion is configured.
Views
Traffic class view
Predefined user roles
network-admin
: Specifies a traffic class by its name, a case-sensitive string of 1 to 31
Description
Traffic class name and its match criteria.
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic
class matches the packets that match any of its match criteria.
Match criteria.
to define a match criterion.
to delete a match criterion.
2