H3C S6550X-HI Series Command Reference Manual page 2200

qos wrr group sp
Use
qos wrr group sp
Use
undo qos wrr group sp
Syntax
qos wrr queue-id group sp
undo qos wrr queue-id
Default
All queues on a WRR-enabled interface are in WRR group 1.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies a queue by its ID. The value range for this argument is 0 to 7 or keywords in
queue-id
Table 17.
Usage guidelines
This command is available only on a WRR-enabled interface. Queues in the SP group are scheduled
with SP. The SP group has higher scheduling priority than the WRR groups.
You must use the
command on an interface.
Examples
# Enable WRR queuing on Twenty-FiveGigE 1/0/1, and assign queue 0 to the SP group.
<Sysname> system-view
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] qos wrr byte-count
[Sysname-Twenty-FiveGigE1/0/1] qos wrr 0 group sp
Related commands
display qos queue wrr interface
qos wrr
Congestion avoidance commands
WRED commands
display qos wred interface
Use display qos wred interface
Syntax
display qos wred interface [ interface-type interface-number ]
to assign a queue to the SP group.
to remove a queue from the SP group.
command to enable WRR queuing before you can configure this
qos wrr
to display the WRED information for interfaces.
46