H3C S6550X-HI Series Command Reference Manual page 2348

Field
Local ID
Remote ID type
Remote ID
Auth sign method
Auth verify method
Integrity algorithm
PRF algorithm
Encryption algorithm
Life duration
Remaining key duration
Diffie-Hellman group
NAT traversal
DPD
Transmitting entity
Local window
Remote window
Local request message ID
Remote request message ID
Local next message ID
Remote next message ID
Pushed IP address
Assigned IP address
# Display the number of IKEv2 SAs.
[Sysname] display ikev2 sa count
IKEv2 SAs count: 0
display ikev2 statistics
Use
display ikev2 statistics
Syntax
display ikev2 statistics
Description
ID of the local security gateway.
ID type of the remote security gateway.
ID of the remote security gateway.
Signature method that the IKEv2 proposal uses in
authentication.
Verification method that the IKEv2 proposal uses in
authentication.
Integrity protection algorithms that the IKEv2 proposal uses.
PRF algorithms that the IKEv2 proposal uses.
Encryption algorithms that the IKEv2 proposal uses.
Lifetime of the IKEv2 SA, in seconds.
Remaining lifetime of the IKEv2 SA, in seconds.
DH groups used in IKEv2 key negotiation.
Whether a NAT gateway is detected between the local and
remote ends.
DPD settings:
•
Detection interval in seconds.
•
Retry interval in seconds.
If DPD is disabled, this field displays Interval 0 secs, retry
interval 0 secs.
Role of the local end in IKEv2 negotiation, initiator or
responder.
Window size that the local end uses.
Window size that the remote end uses.
ID of the request message that the local end is about to send.
ID of the request message that the remote end is about to
send.
ID of the message that the local end expects to receive.
ID of the message that the remote end expects to receive.
IP address pushed to the local end by the remote end.
IP address assigned to the remote end by the local end .
to display IKEv2 statistics.
14