H3C S6550X-HI Series Command Reference Manual page 1911

Field
Current GR state
display ripng interface
Use
display ripng interface
Syntax
display ripng process-id interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
interface-type interface-number
not specify this argument, the command displays information about all interfaces for the RIPng
process.
Examples
# Display interface information for RIPng process 1.
<Sysname> display ripng 1 interface
Total: 1
Interface: Vlan-interface100
Link-local address: FE80::20C:29FF:FEC8:B4DD
Split-horizon: On
MetricIn: 0
Default route: Off
Update output delay: 20 (ms)
Primary path detection mode: BFD echo
Summary address:
Table 4 Command output
Field
Total
Interface
Link Local Address
Split-horizon
: Specifies a RIPng process by its ID in the range of 1 to 65535.
1::/16
Description
GR state:
•
Under GR—GR is in process.
•
Normal—GR is not in progress or has completed.
to display interface information for a RIPng process.
: Specifies an interface by its type and number. If you do
Poison-reverse: Off
MetricOut: 1
Output count: 3
Description
Number of interfaces running RIPng.
Name of an interface running RIPng.
Link-local address of an interface running RIPng.
Indicates whether split horizon is enabled:
•
On—Enabled.
•
Off—Disabled.
5