H3C S6550X-HI Series Command Reference Manual page 2199

Syntax
qos wrr queue-id group 1 byte-count schedule-value
undo qos wrr queue-id
Default
All queues on a WRR-enabled interface are in WRR group 1, and queues 0 through 7 have a weight
of 1, 2, 3, 4, 5, 9, 13, and 15, respectively.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies a queue by its ID. The value range for this argument is 0 to 7 or keywords in
queue-id
Table 17.
Table 17 The number-keyword map for the
Number
0
1
2
3
4
5
6
7
: Specifies WRR group 1. Only WRR group 1 is supported in the current software version.
group 1
byte-count
schedule-value
Usage guidelines
You must use the
queuing parameters for a queue on an interface.
Examples
# Enable packet-count WRR queuing on Twenty-FiveGigE 1/0/1, assign queue 0 to WRR group 1,
and specify scheduling weight 10 for queue 0.
<Sysname> system-view
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] qos wrr byte-count
[Sysname-Twenty-FiveGigE1/0/1] qos wrr 0 group 1 byte-count 10
Related commands
display qos queue wrr interface
qos wrr
Keyword
be
af1
af2
af3
af4
ef
cs6
cs7
: Allocates bandwidth to queues in bytes.
: Specifies a scheduling weight. The value range for this argument is 1 to 15.
command to enable WRR queuing before you can configure WRR
qos wrr
argument
queue-id
45