H3C S6550X-HI Series Command Reference Manual page 2090

Permitted 0
Denied 0
index: 10
Table 7 Command output
Field
Prefix-list
Permitted
Denied
index
deny
6.6.6.0/24
ge
le
Related commands
ip prefix-list
reset ip prefix-list
if-match ip
Use
if-match ip
an ACL or IPv4 prefix list.
Use
undo if-match ip
Syntax
if-match ip { address | next-hop | route-source } { acl { ipv4-acl-number |
name ipv4-acl-name } | prefix-list prefix-list-name }
undo if-match ip { address | next-hop | route-source } [ acl | prefix-list ]
Default
No ACL or IPv4 prefix list match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Matches the destination address of IPv4 routes.
address
: Matches the next hop of IPv4 routes.
next-hop
route-source
Neighbor field in the output from the
Deny 6.6.6.0/24
Description
Name of the IPv4 prefix list.
Number of routes matching the criterion.
Number of routes not matching the criterion.
Index of an item.
Match mode of the item:
•
Permit.
•
Deny.
IP address and mask.
Greater-equal, the lower mask length limit.
Less-equal, the upper mask length limit.
to match IPv4 routes whose destination, next hop, or source address matches
to remove the specified ACL or IPv4 prefix list match criterion.
: Matches the source address of BGP routes. This keyword corresponds to the
display ip routing-table verbose
38
ge 26 le 28
command.