H3C S6550X-HI Series Command Reference Manual page 2025

Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
router-id
Usage guidelines
The router ID is the unique identifier for the device to run OSPFv3 in the AS. An OSPFv3 process
cannot run without a router ID.
You must specify a unique router ID for each OSPFv3 process in an AS and on a router.
Examples
# Configure the router ID 10.1.1.3 for OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] router-id 10.1.1.3
Related commands
ospfv3
shutdown process
Use
shutdown process
Use
undo shutdown process
Syntax
shutdown process
undo shutdown process
Default
An OSPFv3 process is not shut down.
Views
OSPFv3 view
Predefined user roles
network-admin
Usage guidelines
Both this feature and OSPFv3 isolation can be used for OSPFv3 maintenance.
After you execute the
performs the following operations:
•
Sends 1-way hello packets to its neighbors. On receipt of the packets, the neighbors disconnect
from the process.
•
Stops receiving and sending OSPFv3 packets.
•
Clears its neighbor, LSDB, and OSPFv3 route information.
After maintenance, you can use the
neighbor relationship re-establishment.
: Specifies a router ID in IPv4 address format.
to shut down an OSPFv3 process.
shutdown process
to restart an OSPFv3 process.
command for an OSPFv3 process, the process
undo shutdown process
91
command to restart the process for