H3C S6550X-HI Series Command Reference Manual page 1898

Field
RelyDepth
TunnelCnt
TunnelID
Topology
Weight
Flags
SRPolicyNID
SRInterface
ColorWeight
Locator
OrigLinkID
RealLinkID
display ipv6 route-static routing-table
Use
display ipv6 route-static routing-table
information.
Syntax
display ipv6 route-static routing-table [ vpn-instance vpn-instance-name ]
[ ipv6-address prefix-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, the command
displays IPv6 static routing table information for the public network.
ipv6-address
: Specifies the destination IPv6 address.
Description
Recursion depth.
Number of tunnels after route recursion.
ID of the tunnel after route recursion.
This field is not supported in the current software version.
Topology name. This field is blank for IPv6, because IPv6 does
not support non-base topologies.
ECMP route weight. This field displays 0 for non-ECMP routes.
Flags of the detailed next hop.
This field is not supported in the current software version.
NIB ID of the route obtained from an SR-MPLS TE policy
through route recursion.
This field is not supported in the current software version.
Output interface of the route obtained from the SR-MPLS TE
policy through route recursion.
This field is not supported in the current software version.
Weight value of the color attribute in the SR-MPLS TE policy.
This field is not supported in the current software version.
IPv6 prefix of the locator to which the SID belongs.
If no locator is available, this field displays N/A.
This field is not supported in the current software version.
Original link ID of the SDWAN TTE connection.
This field is not supported in the current software version.
Real link ID of the SDWAN TTE connection.
to display IPv6 static routing table
: Specifies an MPLS L3VPN instance by its name, a
6