H3C S6550X-HI Series Command Reference Manual page 2352

Parameters
: Specifies the host name of the IKEv2 peer, a case-insensitive string of 1 to 253 characters.
name
Usage guidelines
Only the initiator can look up an IKEv2 peer by host name in IKEv2 negotiation, and the initiator must
use an IPsec policy.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify host name test of the IKEv2 peer.
[Sysname-ikev2-keychain-key1-peer-peer1] hostname test
Related commands
ikev2 keychain
peer
identity
Use
identity
Use
undo identity
Syntax
identity { address { ipv4-address | ipv6 { ipv6-address } } | fqdn fqdn-name
| email email-string | key-id key-id-string }
undo identity
Default
The IKEv2 peer's ID is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
ipv4-address
ipv6 ipv6-address
fqdn fqdn-name
string of 1 to 255 characters, such as www.test.com.
email email-string
a case-sensitive string of 1 to 255 characters in the format defined by RFC 822, such as
esec@test.com.
key-id key-id-string
argument is a case-sensitive string of 1 to 255 characters, and is usually a vendor-specific string for
doing proprietary types of identification.
to specify the ID of an IKEv2 peer.
to restore the default.
: Specifies the IPv4 address of the peer.
: Specifies the IPv6 address of the peer.
: Specifies the FQDN of the peer. The
: Specifies the email address of the peer. The
: Specifies the remote gateway's key ID. The
fqdn-name
18
argument is a case-sensitive
argument is
email-string
key-id-string