H3C S6550X-HI Series Command Reference Manual page 2048

ipv6 policy-based-route (interface view)
Use
ipv6 policy-based-route
an interface.
Use
undo ipv6 policy-based-route
Syntax
ipv6 policy-based-route policy-name
undo ipv6 policy-based-route
Default
No IPv6 is applied to an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
policy-name
specified policy must already exist.
Examples
# Apply policy aaa to VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 policy-based-route aaa
Related commands
display ipv6 policy-based-route setup
ipv6 policy-based-route
ipv6 policy-based-route (system view)
Use
ipv6 policy-based-route
view of an existing IPv6 policy node.
Use
undo ipv6 policy-based-route
Syntax
ipv6 policy-based-route policy-name [ deny | permit ] node node-number
undo ipv6 policy-based-route policy-name [ deny | node node-number |
permit ]
Default
No IPv6 policy nodes exist.
Views
System view
Predefined user roles
network-admin
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The
(system view)
to configure IPv6 interface PBR by applying an IPv6 policy to
to restore the default.
to create an IPv6 policy node and enter its view, or enter the
to delete an IPv6 policy or IPv6 policy node.
13