H3C S6550X-HI Series Command Reference Manual page 1980

display ospfv3 spf-tree
Use
display ospfv3 spf-tree
Syntax
display ospfv3 [ process-id ] [ area area-id ] spf-tree [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
specify a process, this command displays SPF tree information for all OSPFv3 processes.
area area-id
integer in the range of 0 to 4294967295 that is translated into the IP address format. If you do not
specify an area, this command displays SPF tree information for all OSPFv3 areas.
: Displays detailed OSPFv3 SPF tree information. If you do not specify this keyword, the
verbose
command displays brief OSPFv3 SPF tree information.
Examples
# Display brief SPF tree information for Area 0 in OSPFv3 process 1.
<Sysname> display ospfv3 1 area 0 spf-tree
Flags: S-Node is on SPF tree
I-Node or Link is init
P-Neighbor is parent
C-Neighbor is child
N-Link is a new path
T-Node is tunnel destination
E-Node is SRv6-TE policy endpoint
SPFNode
>1.1.1.1
>2.2.2.2
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
: Specifies an OSPFv3 area by its ID. The area ID is an IP address or a decimal
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
Type Flag
Router S R
Router S T
to display OSPFv3 SPF tree information.
R-Node is directly reachable
D-Node or Link is to be deleted
A-Node is in candidate list
H-Nexthop changed
V-Link is involved
Shortest Path Tree
SPFLink
-->2.2.2.2
-->2.2.2.2
-->1.1.1.1
46
Type Cost Flag
RT2RT 1 C
RT2RT 1 P
RT2RT 1 P