H3C S6550X-HI Series Command Reference Manual page 1865

[
Sysname-bgp-default
[
Sysname-bgp-default-rpki
[
Sysname-bgp-default-rpki-server
Related commands
refresh-time
route-mode adj-rib-in
Use
route-mode adj-rib-in
peers and peer groups to the BMP server.
Use
undo route-mode adj-rib-in
Syntax
route-mode adj-rib-in [ pre-policy | post-policy | both ]
undo route-mode adj-rib-in
Default
BGP sends routes received from all the monitored peers and peer groups to the BMP server without
route filtering.
Views
BMP server view
Predefined user roles
network-admin
Parameters
pre-policy
post-policy
: Sends both filtered and unfiltered routes to the BMP server.
both
Usage guidelines
To enable BGP to send routes received from all monitored peers and peer groups to the BMP server,
make sure BGP has established a TCP connection to the BMP server.
If you do not specify any parameters, the command sends routes received from all the monitored
peers and peer groups to the BMP server without route filtering.
The configuration of the
groups. The configuration of the
instance view takes effect only on the specified peer or peer group. The configuration of the
route-mode
adj-rib-in
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Enable BGP to send routes received from all the monitored peers and peer groups to the BMP
server after route filtering.
<Sysname> system-view
[Sysname] bmp server 5
[Sysname-bmpserver-5] route-mode adj-rib-in post-policy
]
rpki
]
server tcp 1.1.1.1
: Sends routes to the BMP server without route filtering.
: Sends routes to the BMP server after route filtering.
route-mode adj-rib-in
peer route-mode
command takes precedence over the configuration of the
command.
]
response-time 15
to enable BGP to send routes received from all the monitored
to restore the default.
command takes effect on all peers and peer
command in BGP instance view or BGP-VPN
61
peer
route-mode