H3C S6550X-HI Series Command Reference Manual page 2198

Table 16 Command output
Field
Interface
Output queue
Group
Byte count
Related commands
qos wrr
qos wrr
Use
qos wrr
Use
undo qos wrr
Syntax
qos wrr byte-count
undo qos wrr byte-count
Default
An interface uses packet-count WRR queuing.
Views
Interface view
Predefined user roles
network-admin
Parameters
byte-count
Usage guidelines
You must use the
queuing parameters for a queue on an interface.
Examples
# Enable
byte-count
<Sysname> system-view
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] qos wrr byte-count
Related commands
display qos queue wrr interface
qos wrr weight
Use
qos wrr weight
Use
undo qos wrr
Description
Interface type and interface number.
Type of the current output queue.
ID of the group a queue is assigned to.
Byte-count queue scheduling weight of a queue. N/A is displayed for a queue
that uses the SP scheduling algorithm.
to enable WRR queuing on an interface.
to restore the default.
: Allocates bandwidth to queues in bytes.
command to enable WRR queuing before you can configure WRR
qos wrr
WRR queuing on Twenty-FiveGigE 1/0/1.
to configure the WRR queuing parameters for a queue on an interface.
to restore the default.
44