H3C S6550X-HI Series Command Reference Manual page 2000

Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
: Specifies GR restart interval in the range of 40 to 1800 seconds.
interval
Usage guidelines
For GR restart to succeed, the value of the GR restart interval cannot be smaller than the maximum
OSPFv3 neighbor dead time of all the OSPFv3 interfaces.
Examples
# Set the GR restart interval for OSPFv3 process 1 to 100 seconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart interval 100
Related commands
ospfv3 timer dead
import-route
Use
import-route
Use
undo import-route
Syntax
import-route bgp4+ [ as-number ] [ allow-ibgp ] [ [ cost cost-value |
inherit-cost ] | nssa-only | route-policy route-policy-name | tag tag | type
type ] *
import-route { direct | static } [ [ cost cost-value | inherit-cost ] |
nssa-only | route-policy route-policy-name | tag tag | type type ] *
import-route { isisv6 | ospfv3 | ripng } [ process-id | all-processes ]
[ allow-direct | [ cost cost-value | inherit-cost ] | nssa-only |
route-policy route-policy-name | tag tag | type type ] *
undo import-route { bgp4+ | direct | { isis | ospf | rip } [ process-id |
all-processes ] | static }
Default
OSPFv3 does not redistribute routes.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
: Redistributes IPv6 BGP routes.
bgp4+
as-number
4294967295. If you do not specify this argument, this command redistributes all IPv6 EBGP routes.
to enable route redistribution.
to disable route redistribution.
: Redistributes routes from an AS specified by its number in the range of 1 to
66