H3C S6550X-HI Series Command Reference Manual page 2097

Syntax
if-match ipv6 odd-prefix-length prefix-length-number
undo if-match ipv6 odd-prefix-length
Default
No match criterion is configured to match the length and last bit of IPv6 route prefixes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
prefix-length-number
Examples
# Configure node 10 of routing policy rp1 to permit a route if its prefix length is 64 and the last bit of
its prefix is an odd number.
<Sysname> system-view
[Sysname] route-policy rp1 permit node 10
[Sysname-route-policy-rp1-10] if-match ipv6 odd-prefix-length 64
ipv6 prefix-list
Use
ipv6 prefix-list
Use
undo ipv6 prefix-list
Syntax
ipv6 prefix-list prefix-list-name [ index index-number ] { deny | permit }
ipv6-address
[ less-equal max-prefix-length ] | inverse inverse-prefix-length }
undo ipv6 prefix-list prefix-list-name [ index index-number ]
Default
No IPv6 prefix lists exist.
Views
System view
Predefined user roles
network-admin
Parameters
prefix-list-name
characters.
index index-number
65535. An item with a smaller index number is matched first. If you do not specify this option, the
index number starts from 10 and increases by 10 for each of the consecutive IPv6 prefix list items.
This option is required for target configuration. For more information about target configuration, see
Fundamentals Configuration Guide.
: Specifies a prefix length in the range of 1 to 128.
to configure an IPv6 prefix list or an item for it.
to remove an IPv6 prefix list or an item.
{ prefix-length
: Specifies an IPv6 prefix list name, a case-sensitive string of 1 to 63
: Specifies an index number for an IPv6 prefix list item, in the range of 1 to
[ greater-equal
45
min-prefix-length ]