H3C S6550X-HI Series Command Reference Manual page 1921

Default
The maximum number of RIPng ECMP routes equals the maximum number of ECMP routes, which
is configurable by using the
Views
RIPng view
Predefined user roles
network-admin
Parameters
: Specifies the maximum number of ECMP routes. When this argument takes a value of 1,
number
RIPng does not perform load balancing. The value range and default value for this argument vary by
device model.
Usage guidelines
You can set a smaller value for the
maximum load-balancing
load-balancing
max-ecmp-num
Examples
# Set the maximum number of ECMP routes to 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
Related commands
max-ecmp-num
output-delay
Use
output-delay
packets that can be sent at each interval.
Use
undo output-delay
Syntax
output-delay time count count
undo output-delay
Default
A RIPng process sends a maximum of three RIPng packets every 20 milliseconds.
Views
RIPng view
Predefined user roles
network-admin
Parameters
time : Specifies the RIPng packet sending interval in the range of 10 to 100 milliseconds.
: Specifies the maximum number of RIPng packets sent by a RIPng process at each interval,
count
in the range of 1 to 30.
max-ecmp-num
max-ecmp-num
command. After a reboot, the value for the
command automatically changes to be the same as the value for the
command.
to set the RIPng packet sending interval and the maximum number of RIPng
to restore the default.
command.
command than the current value for the
15
maximum