H3C S6550X-HI Series Command Reference Manual page 2050

Examples
# Enable the IPv6 PBR logging feature.
<Sysname> system-view
[Sysname] ipv6 policy-based-route-log enable
Related commands
apply next-hop
ipv6 policy-based-route
reset ipv6 policy-based-route statistics
Use
reset ipv6 policy-based-route statistics
Syntax
reset ipv6 policy-based-route statistics [ policy policy-name ]
Views
User view
Predefined user roles
network-admin
Parameters
policy policy-name
If you do not specify a policy, this command clears IPv6 PBR statistics for all policies.
Examples
# Clear all IPv6 PBR statistics.
<Sysname> reset ipv6 policy-based-route statistics
Related commands
display ipv6 policy-based-route interface
display ipv6 policy-based-route local
(system view)
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
15
to clear IPv6 PBR statistics.