Stop A Script That Is Currently Running - Digi IX10-00G4 User Manual

Applications
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Stop a script that is currently running

You can stop a script that is currently running.

Web
1. Log into the IX10 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
Scripts that are currently running have the status of active.
IX10 User Guide
Label Enabled
----------- -------
script1 true
script2 true
Stop a script that is currently running
Status Run time
------ --------
active
idle 01:00
577