Stop A Script That Is Currently Running - Digi IX30 User Manual

Applications
2. Use the show scripts
> show scripts
Index
-----
0
1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Stop a script that is currently running

You can stop a script that is currently running.

Web
1. Log into the IX30 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
IX30 User Guide
command at the system prompt:
Label Enabled
----------- -------
script1 true
script2 true
Label Enabled
----------- -------
script1 true
script2 true
Set up the IX30 to automatically run your applications
Status Run time
------ --------
active
idle 01:00
Status Run time
------ --------
active
idle 01:00
680