Show Script Information; Stop A Script That Is Currently Running - Digi LR54 User Manual

Applications
12. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show script information

You can view status and statistics about location information from either the WebUI or the command
line.

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show scripts
> show scripts
Index
-----
0
1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Stop a script that is currently running

You can stop a script that is currently running.
LR54 User Guide
command at the system prompt:
Label Enabled
----------- -------
script1 true
script2 true
Set up the LR54 to automatically run your applications
Status Run time
------ --------
active
idle 01:00
762