Stop A Script That Is Currently Running - Digi IX14 User Manual

Applications
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Stop a script that is currently running

You can stop a script that is currently running.

WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
Scripts that are currently running have the status of active.
IX14 User Guide
Label Enabled
----------- -------
script1 true
script2 true
Stop a script that is currently running
Status Run time
------ --------
active
idle 01:00
459